Printer configuration 75Change the SNMP settingsIntroductionTask for: system administratorSNMP (Simple Network Management Protocol) is a standard protocol used tomonitor, troubleshoot and control other SNMP-compliant devices that areattached to the network.You maintain the connection of the Océ VarioPrint 2090 to the network. Youcan define to use the SNMP protocol ('Enable') or not, the 'SNMP communityname', the 'System description' and up to three 'SNMP manager IP addresses'to receive notifications of SNMP alerts.The 'SNMP community name' has a maximum length of 20 characters.In the context of SNMP, the 'Community name' defines securitycharacteristics.■ read permission: use the 'community name''public'■ write permission: use the 'community name''oce_operator'To define the 'System description', enter a user friendly description of thesystem to present itself with on the network, to be used by for exampleIntraLogic (available in future release).Specify SNMP manager IP addresses, either by IP address or by host name(max. length 32 characters).Before you beginStart the Océ VarioPrint 2090 Settings Editor in your web browser in thesystem administrator mode (see ‘Access the Océ VarioPrint 2090 SettingsEditor in system administrator mode’ on page 12).Attention: If you change the SNMP settings, you must restart the OcéVarioPrint 2090 to activate the new settings.
