Basic copy operations 3cm3521 3-79Basic copy operations Chapter 33.13 Specifying center bindingThe paper that is fed out can be folded in half and stapled at two placesalong the vertical center.2 NoteThe Fold & Staple settings are available only if the optional finisher andsaddle stitcher are installed.!DetailIn order for copies to be bound at the center or folded in half, all of thefollowing conditions must be met.- The paper width must be between 7-1/4 inch and 11-3/4 inch.- The paper length must be between 10 inch and 17 inch.Original(The “Booklet” functionis automatically set.)“Center Staple” + “Fold” settings(folded in half and stapled at thecenter in two places)“Fold” setting(folded in half)“Center Staple” setting(stapled at the center intwo places)
