Utility 12cm3521 12-21Utility Chapter 12Job List DefaultInitial setting2 ReminderTo change the default settings for Scan mode or Fax mode, press the[Scan] or [Fax] key, enter Utility mode, and then select a setting for thisparameter.!DetailFor details on the default settings and the factory default settings, referto “Automatically canceling the settings (automatic panel reset)” onpage 2-30.Description Default SettingSelect the job list displayed as the default in the Job List screen.• Current Print Jobs:The Current Jobs list appears on the Print tab.• Print Job History:The Job History list appears on the Print tab.Current Print JobsDescription Default SettingSpecify the default settings for Copy mode.The copy settings selected when the machine is turned on (the pow-er switch is set to “n”) or the [Reset] key is pressed can be specified.• Current Setting:The settings specified from the touch panel before Utility modewas entered are set as the default settings for Copy mode.• Factory Default:The factory default settings are set as the default settings forCopy mode.Factory Default
