Using copy functions 2cm4520 2-33Using copy functions Chapter 22.11 Selecting the Paper settingsSpecifying the paper sizeThe size of the paper loaded into the 1st drawer and thebypass tray can be specified.For details on loading the paper, refer to the User’sGuide [Copy Operations].The size of the paper loaded into the 1st drawer and thebypass tray can be selected in any of the followingways.Setting DescriptionAuto Detect Select this setting to automatically detect thesize of the paper loaded into the bypass tray.Inches *1 A paper size in inches can be set so that thepaper drawer is used specifically with theselected paper size.This is useful when the size of the paper thatis loaded cannot be automatically detected.Custom Size *2 A custom paper size can be set so that thepaper drawer is used specifically with theselected paper size.Custom-sized paper can be loaded into the1st drawer or the bypass tray.OversizedPaper *3 A wide paper size can be set so that thepaper drawer is used specifically with theselected paper size.Wide paper can be loaded into the 1st draweror the bypass tray.
