5 Setting up the PCL driver (Windows)5-22 cm5520Specifying the center staple and fold settingYou can specify to center staple and fold a printed document. By specifyingthe center staple and fold setting, printed documents can be folded in halfand stapled.2 ReminderThe center staple and fold function is available only when optional finisher9834 is installed.1 Click the Finish tab.2 Select the “Center Staple and Fold” check box.2 NoteThe center staple and fold function cannot be specified when the staple,punch, or fold function is specified.Hole punchingHoles can be punched into the printed document.2 ReminderThe hole punch function is available only when the punch kit is installedon the optional finisher.1 Click the Finish tab.2 Select the “Punch” check box.3 From the drop-down list, specify the number of punched holes.2 NoteThe hole-punch position changes according to the binding position spec-ified from “Binding Position”.
