Setting up the fax driver (Windows) 9cm5520 9-19Specifying the user authentication settingsIf the user authentication settings have been specified on this machine, youmust enter a user name and password.2 ReminderIf a fax is sent using a user name or password that is not a registered ac-count on this machine, or if a fax is sent without selecting a user under“User Authentication”, the operation is not authenticated by this machineand the job is canceled.If the user authentication settings are specified on this machine and theauthentication operation restriction function is in mode 2, the applicableuser is locked and cannot be accessed if the authentication informationis not entered correctly.If the user authentication settings are not specified on the Configure tab,user authentication cannot be performed. If using the user authenticationfunction, be sure to specify the settings on the Configure tab. For details,refer to “Specifying the Configure tab settings” on page 9-26.1 Click the Basic tab.2 Click the [Authentication/Account Track] button.3 Select “Recipient User”, and then enter the user name and password.
