1114Setting the IPX/SPX ProtocolYou can set the IPX/SPX protocol on this equipment. The IPX/SPX protocol is usually used to communi-cate with the NetWare file server through the network.1 Press the [NETWORK] button in the ADMIN menu.• The NETWORK menu is displayed.To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”. P.872 Press the [IPX/SPX] button.• The IPX/SPX screen is displayed.3 Specify the following items as required.• ENABLE IPX/SPX — Press the [ENABLE] button to enable the IPX/SPX protocol, or [DISABLE] button to dis-able the IPX/SPX protocol.• FRAME TYPE — Press the [AUTO] button to automatically detect the appropriate frame type, or press otherspecific frame type button. If you do not know the frame type that must be used, select the [AUTO] button.4 Press the [ENTER] button.• Returns you to the NETWORK menu.