11DISABLING RESEND KEYWhen the fax or network scanner function is enabled, this program is used to disabledisplay of the [RESEND] key, which is used to transmit to the last destination transmitted to.To disable display of the [RESEND] key, touch the checkbox so that a checkmark appears.When the [RESEND] key is disabled, it will not appear in the main screens of fax mode andscanner mode (page 1-4 of the Facsimile Operation Manual and page 9 of the NetworkScanning Operation Manual). (Normally the key appears in these screens.)RELEASE THE LOCK ON DOCUMENT FILING OUTPUT OPERATIONThis program is used when a file or folder has been locked (operation is prohibited) due toentry of an incorrect password. Touch the [RELEASE] key in the "RELEASE THE LOCKON DOCUMENT FILING OUTPUT OPERATION" screen to release all locked files andfolders. When there are no locked files or folders, the "RELEASE THE LOCK ONDOCUMENT FILING OUTPUT OPERATION" is grayed out in the "SECURITY SETTINGS"menu screen.PRODUCT KEYTo initially enable the security function, you must use a key operator program to enter theproduct key (password). The name of the key operator program used for this purpose is"DATA SECURITY KIT". Please ask your dealer for the product key.Touch the [DATA SECURITY KIT] key, enter the product key with the numeric keys, andthen touch the [ENTER] key. If an incorrect number is entered...A message will appear instructing you to check the product key number again. If the correct number is entered...A message will appear instructing you to turn the power off and then on. Touch the [OK]key when you have finished reading the message. Turn first the power switch and thenthe main power switch off. The security function will be enabled when the power is turnedon again.Once the security function is enabled, the [DATA SECURITY KIT] key will no longerappear in the product key entry screen.