SAMM User Manual30To configure for playback mode with demodata:To configure for data acquisition: in the Size field, enter Width: 3.0and Length: 8.0.5. Click the Display tab.6. In the Swath colormap panel, leave the Mosaic in progress fieldset to Goldenrod; and leave the Completed field set toGoldenrod..7. In the Units of measure panel, visuallyconfirm the Distance and Verticaldistance (depth/altitude) fields areset to Meters (m). Click the Mosaictab.8. In the General panel, set the Defaultresolution to 5.0 cm.9. The MSK output panel is not applicablein playback mode. Do not change thesetting.10. Check that your Configuration windowmatches Figure 25.reference point using the same numberingconvention; in the Hdg field, enter the heading bias indegrees; in the Compass bias field, enter theheading mount bias plus the declination ofyour survey location in degrees; choose your vessel shape; and in the Size field, enter the length and widthof the boat in the unit set in theconfiguration window.6. Click the Display tab.7. In the Swath colormap panel, choose thedesired colormap for active, inactive, andselected swaths.8. In the Units of measure panel, set the distanceand vertical distance units to the unit of yourmeasured antenna and sonar offsets. Clickthe Mosaic tab.9. In the MSK output panel, choose the desiredmethod by which to break raw data files.Figure 25. Configuration Window for Demo Data
