SAMM User Manual441. Click the Add data icon.2. Click Load files.3. Navigate to the directory containing the files.4. Select files you wish to load. Note that at any one time you can only load the data of thesame format. If you wish to load multiple passes from different sensors, you may do thisonly in multiple, sequential loadings (As an example, first create the project and loadforward-look data and create swaths. Then when those files have finished mosaicking,you can load sidescan data from the same are, and SAMM will create new swaths forthem in the same project.)5. Click Open.6. Monitor file loading progress in the status bar on the bottom right. The swaths displaywhen all files are loaded.6.1.2 Advanced Load FilesAdvanced load files option enables the user to select data files of the same type from multiplelocations as well as to specify mosaicking options (Figure 35).Figure 35. Advanced Load DialogTo load data files in Advanced load files mode:1. Click the Add data icon2. Click Advanced load files icon.3. Navigate to the directory containing the files.4. Select files you wish to load. Note that you can only load the data of the same format.5. In the Advanced Load dialog, add more files or remove selected files as necessary.6. Set mosaic resolution.
