Oceanic Vision Series Manual
                     | |
S auna & SteamOceanic Saunas 01902 450 550 sales@oceanic-saunas.co.uk813. Benchesi. Refer to your parts list for the bench layouts.ii. For a high bench you will need to fix the bench rail at 781mm from the floor and for low bench481mm.iii. For one tier of benches fix one 640mm rail as shown to the right either at 481 or 781mm fromthe flooriv. For two tiers of benches the second rail 665 will be fixed as shown.v. Dowel plugs have been suppied to fill the holes, these are to be fixed in using the filler and cutoff using a wood chisel, sanded flat then filled and sanded again if required.vi. This image shows howthe bench rails aresupported by the 50mmdouble round trim andcorner mould with theconcave front. We don’trecommend that you addthese until the cornice andskirt is on first. We thinkthis gives the best astheticlook.Vision Sauna Manual |
Related manuals for Oceanic Vision Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine