Ohmeda Giraffe Spot PT Lite Maintenance Service Manual

Contents

Ohmeda Giraffe Spot PT Lite Maintenance Service Manual Manual pdf 7 page image

Set up and Checkout2-1 6600-0361-000 08/10/02 2-1CAUTION w To avoid damage to equipment, installbulb before powering unit.Mounting the unit1. Using the hex key provided with the unit, loosen the twomounting screws on the side of the mounting bracket2. Position the light source unit on the accessory dovetail rail.3. Secure the unit in place by tightening the two mountingscrews with the hex key.Pre-use Check Out Procedure1. Examine the power cord, gooseneck, and light source unitfor obvious signs of damage.2. Check that the light source unit is securely attached to theaccessory dovetail rail.3. Move the gooseneck back and forth and up and down andverify that it moves freely and stays in position.4. Connect the power cord to an appropriate power source.5. Select “|” on the power switch to turn the power on. Thepower LED indicator will light.Note: Immediately after turning the unit on, it takes severalseconds for the light to be emitted from the lens head. Ifthe light does not come on, switch off the unit, wait aboutten seconds and switch it back on.6. Position the lens head so that the spot is on the center ofthe bed.1231. Mounting bracket2. Mounting screws3. Dove tail railCI.38.013