ES 1220n Troubleshooting • 190Printer takes a long time to start printing.Toner rubs off when you rub the printed surface.Possible cause RemedyThe printer has to warmup returning from powersave mode.In the printer menu settings, set power save to ahigher value to increase the length of time beforeentering power save mode (SYS CONFIG MENU→ POW SAVE TIME).The image drum carriesout a cleaning processto ensure print quality,which takes time.Wait until this process has been completed.The fuser unit adjuststemperature, whichtakes time.Wait until this process has been completed.The printer isprocessing data fromanother interface.Wait until this data is processed.Possible cause RemedyMedia Weight andMedia Type settingsmay not be appropriate.Set the value of media weight in the menu tothe next heaviest one (MEDIA MENU → YYYMEDIA WEIGHT).Packing materials wereleft on the fuser when itwas installed.Careful! Fuser my be HOT!Open the top cover and check to be sure thatall the packing materials were removed fromthe fuser. To remove the fuser see “FuserReplacement” on page 147.
