Page: 41Service Guide OKIPAGE 18/18nChapter 3 Parts Replacement3.3.12 Motor - Main(1) Remove the stacker assy. [See 3.3.6](2) Remove the feeder unit-front. [See 3.3.10] (At this point, the manual feed assy does not have to be removed.)(3) Remove the DC fan motor. [See 3.3.3](4) Remove the contact assy. [See 3.3.2](5) Remove the plate-FG (F) (1).(6) Remove the TR gear (2) and roller transfer (3). (Use Holder-TR Eject (16) for the removal.)(7) Unscrew 7 screws (4) and remove the main frame (5).(8) Unlock latches at two points of the lever back up release 6 and pull it out in right direction.(9) Unhook the EP lock spring (7) and remove the EP lock lever (8).(10) Take off the E ring (9) and remove the plate-FG (1st ) (10) and gear assy-clutch (11).(11) Unlock 2 latches to remove the motor assy-main (12) and idle gear (13).(12) Unscrew 2 screws (14) and remove the motor -main (15) .
