Oki 40834406 User Manual
Also see for B 4350N: Configuration guideWarranty and legal guideInstallation instructionsInstallation instructionsInstallation instructions
  | |
Contents | 
© 2004 Oki Data Americas, Inc. 58366302Install the Tray1. Unpack the tray and remove theshipping materials.2. Turn off the printer and unplug thepower cord.3. Remove the interface cable.4. Note the location of the pins (1),connector (2) and tray opening (3).5. Pull down the printer’s manual feedtray.6. Lower the printer onto the auxiliarytray, aligning the holes/plug on thebottom of the printer on the pins/connector on the tray. You shouldfeel the printer seating and lockingin place.7. Attach the connection cable.8. Reattach the interface cable.9. Plug in the power cord and turn onthe printer.10.Verify installationModels with Operator Panel:a. Press the Menu button one ormore times until INFO. MENUappears on the display.b. Press SELECT twice.The MenuMap prints.Models with Control Button:a. Press the Control Button to takethe printer off-line.b. Press and hold down the controlbutton for at least 2 seconds, butless than 5 seconds. TheMenuMap prints.11. Look for TRAY2 on the first pageof the MenuMap under theMEDIA MENU listing. If it isn’tthere, check to be sure that theconnection between the printerand Tray 2 is secure, then reprintand recheck the MenuMap.12. Check the MEDIA MENUsettings shown on the MenuMapand make any needed changes for• TRAY2 PAPERSIZE• TRAY2 MEDIATYPE• TRAY2 MEDIAWEIGHTto match the print media you willnormally use in Tray 2. (If you needhelp with this, see “OperatorPanels” in your on-line User’sGuide.Load Paper1. Pull out the tray.2. Position the paper guides in thetray.2 nd Paper TrayOki PN-40834406 - 500 Sheet Second Paper TrayInstallation Instructions(continued on back) |
Related manuals for Oki B 4350N
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine