Oki 42625502 User Manual

Also see for C3200n: Configuration guide User manual Service manual Network user's guide User guide

Oki 42625502 User Manual Manual pdf 1 page image

Warning!If the printer has recently been powered on, somefuser components will be very hot. Handle the fuserwith extreme care, holding it only by its handle, whichwill only be mildly warm to the touch. A warninglabel clearly indicates the area. If in doubt, switchthe printer off and wait at least 10 minutes for thefuser to cool before opening the printer cover.1. Press the cover release and open the printer's top cover fully.2. Pull the two blue fuser lock levers (1) towards the front of the printer.3. Holding the fuser by its handle, lift the fuser out of the printer. If the fuser is stillwarm, place it on a flat surface which will not be damaged by heat. After lettingthe fuser cool down, discard it.5. Push the orange transport lock (1) to the left to release it (SNAP!), thenremove the transport lock.6. Holding the new fuser by the handle, with the fuser pressure release lever(1) on the right, lower the fuser into the priner.7. Push the two blue retaining levers (1) toward the rear of the printer to lockthe fuser in place.8.Close and latch the top cover.¬¬¬¬¬58368302¬4. Remove the new fuser from its packaging, then remove any packing tape.Fuser Replacement for Oki 42625501 & 42625502C3200/5150/C5200/C5400 PrintersFuser Instructions

/ 1

Related manuals for Oki C3200n