Oki 43347501 User Manual
Also see for 43347501: User guideUser manualConfiguration guide
                                                                                                           | |
Contents
| 
OkiLAN 8300e Network Userís GuideTroubleshooting - 104Change the cable and try again.Run the Self-diagnostic test.Check the IP Address, Subnet Mask and Gateway are correct.Check that the TCP/IP protocol is set to Enable.Reset the network interface card to factory default settings.If DHCP, BOOTP and RARP are not used, ensure they have been setto Disable.Cannot print with lpr and ftp.Turn the printer off and on again.Check there is a response to the ping command.Check the network cable is correctly connected.Change the cable and try again.Check the host name and IP address are configured in theworkstation.Check the printer port name is configured in the workstation.There are three port names: lp, euc and sjis. Use lp by default aseuc and sjis are specific to printers with PostScript available.Incorrect User name on the banner page.If printing with lpr, the User name printed is unknown and theFilename printed is the Spool file name.If printing with FTP, the User name printed is the User nameentered during FTP login and the File name printed is theTransmitted file name. If the Print Directory name is indicated inthe put command, the File name is not printed. The Printer nameprinted is the Logical Directory name. |
Related manuals for Oki 43347501
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine