OkiLAN 8300e Network Userís GuideConfiguration - 31IP Address SetupIf you only use TCP/IP and the OkiLAN has not yet been configured,occasionally it may not be displayed on AdminManager. You canconfigure the IP address of the OkiLAN by this function.1. Select [IP Address Setup] from the [Setup] menu.2. Set [Ethernet Address] and [IP Address] and select [OK].bmp42.bmp> The Ethernet Address (MAC address) is displayed during theself-diagnostic test.3. AdminManager asks whether you want to initialize thenetwork interface card or not. Select [Yes]. Even if youselect [No] here, the IP address that you set can be usedafter turning the printer OFF and ON. The requirement toturn your printer OFF and ON is dependent on the networkinterface card.
