OkiLAN 8300e Network User’s Guide, C6000n and C6100 SeriesTroubleshooting - 127EtherTalkNot identified by the Chooser and the Setup Utility.Turn the printer off and on again.Check the network cable is correctly connected.Change the cable and try again.If the network resides in a Zone, check the correct Zone name isselected in the Chooser.Check the Zone name in the utility related to the NIC is the sameas the Zone name set in NIC.Check AppleTalk, which is displayed at the right bottom of theChooser, is set to Enable. (In some OS versions Network is usedinstead of AppleTalk.)Check Ethernet is selected in AppleTalk. (In some OS versionsNetwork is used instead of AppleTalk.)Check the print driver is selected in the Chooser.Check the EtherTalk protocol is set to Enable.Print the NIC settings and confirm that the EtherTalk Port name isnot blank.
