Oki B 410dn User Manual
Also see for B410DN: Configuration guideUser guideSpecificationsSafety & warrantySetup guide
                                                                                   | |
Contents
| 
Troubleshooting > 68I NPUT JAM1. Remove the paper tray from the printer (1).2. Remove any crumpled or folded paper.3. Remove any paper from the underside of the printer (2).4. Replace the paper tray.After successful removal of any damaged or misfed paper, the printer should continueprinting.FEED JAM OR EXIT JAM1. Remove the tray and clear any misfed sheets as given above.2. Press the cover release and open the printer’s top cover.NOTEThe B430dn model has been illustrated below. The principles are the same forall models of this printer.WARNING!If the printer has been powered on, the fuser area will be hot. Thisarea is clearly marked. Do not touch it.CAUTION!Never expose the image drum unit to light for more than 5 minutes.Never expose the image drum unit to direct sunlight. Always holdthe image drum unit by the ends or from the top. Never touch thesurface of the green drum inside the image drum unit.12 |
Related manuals for Oki B410DN
manualsdatabase
Your AI-powered manual search engine