Oct 0234 Oki B6100 Installation GuideStep 11: Installing Printer DriversWindows 2000 (USB)Before you use your USB port in Windows 2000, you must complete three steps:Step 1: Setup the HardwareStep 2: Connect to the USB Port.Step 3: Install the printer driver(s)Step 1: Setup the Hardware1. Unpack your printer and complete the hardware setup procedures.Step 2: Connect to the USB PortIf you want to use the USB port, you must purchase a USB cable separately.2. Verify that the printer is turned off. Your computer may be left turned on.3. Connect the flat end of the cable to the computer.4. Connect the square end of the cable to the printer.5. Turn on the printer.6. The computer indicates that it has detected new hardware.Step 3: Install the Printer Driver(s)7. Insert the CD-ROM provided with your printer.8. The printer is detected. The Found New Hardware Wizard appears.9. Click Next.10. Select Search for a suitable driver. . .. Click Next.11. Unselect Floppy Disk Drives.12. Select CD-ROM drives.13. Select Specify a location. Click Next.14. Browse to your CD-ROM drive.15. Click Drivers.16. Click Win2000 folder.17. Select Win2000.inf.18. Click Open.19. Click Ok.20. Windows searches for the files.21. Verify that the displayed information is what you meant to select.22. Click Next.