PAPER RECOMMENDATIONS > 38AUTOMATIC FEED SEQUENCEWith no optional feed trays installed, the Autotray function in the PrintMenu is set by default to OFF and the Tray sequence function is set toDOWN. Ensure that the Autotray function is set to ON (default) when youhave either or both optional feed trays installed. In this way, if a tray runsout of paper, automatic feed will take place in the order Tray 1, Tray 2 (ifinstalled), provided that these trays are set up for identical media.PRINTING ENVELOPES1. Pull out the rear paper exit tray (1) until it locks and lift out thepaper guide (2).2. Pull down the manual feed tray (3) and adjust the paper guides tothe width of the envelope.3. Insert the envelope, flap down and to the left, until the printergrips it.4. Set envelope size and landscape orientation in your software, thenissue the print command.
