7Spill or Leak ProceduresSteps to be taken in case Material is Released or Spilled:Spray water over the spilled and/or leaked materials and thenclean out into a container. A vacuum cleaner with explosion-proof can be used for small spills.Waste Disposal Method: Follow appropriate federal, state andlocal regulations.Control MeasuresRespiratory Protection (Specify Type): Nuisance dustrespiratorVentilation:Local Exhaust-Recommended/Special-not necessaryMechanical(General)-Recommended Other-not necessaryProtective Gloves: Recommended.Eye Protection: Safety goggles.Other Protective Equipment: Not Necessary.Special PrecautionPrecautions to be taken in handling and storing: Store in drycool place. Keep from sparks and open flame. Use withadequate ventilation. To avoid dust explosion, ground allequipment and pour material slowly into vessel.Other Precautions: None.Transportation InformationThis product is not regulated as hazardous materials by theDOT.Regulatory InformationAll ingredients are registered under the Toxic SubstancesControl Act (TSCA) or under polymer exemption.All ingredients are exempt, registered or considered (polymers)under European Inventory of Existing CommercialChemical Substances (EINECS).User's ResponsibilityThis bulletin cannot cover all possible situations which theuser may experience during processing. Each aspect of youroperation must be examined if, or where, additionalprecautions may be necessary. All health and safetyinformation contained in this bulletin must be provided toyour employees or customers. It is your responsibility touse this information to develop appropriate work practiceguidelines and employee instructional programs for youroperation.Date Prepared: May 28, 2002Prepared by:Oki Data Americas, Inc.Engineering Services Department2000 Bishops Gate Blvd.Mt Laurel, NJ 08054-4620Tel: (856) 235-2600Fax: (856) 222-5320http://www.okidata.commy.okidata.comEnglish