3-468/25/02 UNIX Printing Software Administration and Installation GuideChapter 3: Installing and Configuring UNIX Printing Software on an IBM/AIX SystemMount the CD-ROM on an IBM/AIX System Using SMITTo mount a CD-ROM on an IBM/AIX system using SMIT, follow the instructionsbelow:1. Enter the following command at the command line:# SMITThe System Management Window appears2. Click the Devices button.3. Click the CD-ROM select button.The CD-ROM Select Popup appears , displaying a top and lower box. The lowerbox contains the same output as that generated by the CLI version of lsdev.4. Click Done.5. Click the System Management button.6. Click the System Storage Management button.7. Click the File Systems button.8. Click the Mount a File System button.A window appears.9. From the File System Name field, click the List Button.A window appears.10. Select the device file name.Note: Typically, the CD-ROM device file name is the same as the first threecharacters included at the beginning of Step 3 (i.e., cdo). If so, the devicefile is /dev/cdo.11. From the Directory Over Which to Mount field, click the List Button.A window appears.12. Select the directory that was created for the mount point.13. From the Type of File System field, click the List Button.14. Select cdrfs from the list.15. Select n to force the mount.The default values for the remaining fields are valid entries, and do not need to beupdated, unless specifically required by your system.
