Configuring UNIX Printing Software on an IBM/AIX SystemUNIX Printing Software Administration and Installation Guide 8/25/023-51Creating a Print Queue for an IBM/AIX SystemTo create a print queue for an IBM/AIX system, follow the instructions below:1. From the /tmp/install directory, enter the following command at the commandline. Press RETURN.# ./make_printerThe following prompt appears:Select the printer queue name.2. Enter a name for the printer queue. Press RETURN.The following prompt appears:Enter the name of the server:3. Enter a name for the printer. Press RETURN.The following prompt appears:Enter the port of the server:4. Enter a port number for the printer. Press RETURN.Example:6869Note: This is the port number that sdriver will use for connecting to the printer.The following prompt appears:Debug Mode [no, n, yes, y]:5. Enter y to activate the debug mode for the socket driver. Press RETURN.The following prompt appears:Log Mode [no, n, yes, y]:6. Enter y to activate the log mode. Press RETURN.The following prompt appears:Enter the pathname of the log file:7. Enter a pathname for the log file:Example:# /home/adv/40testThe following prompt appears:Printer {NAME} has been created.
