2.4 Printing on Custom Size Paper/Long Paper 232.4 Printing on Custom Size Paper/Long PaperThis section explains how to print on custom size paper such as long paper.The paper sizes that can be set on this printer are as follows:Important• Print quality on the part of the paper that extends beyond 356 mm cannot be guaranteed.Loading Custom Size PaperThe way to load custom size paper with the long edge shorter than 356 mm in trays 1 to 4is the same as loading standard size paper. For details, refer to “3.2 Loading Paper” (P. 47).To load long paper in tray 1, follow the procedure below:1. Pull the paper tray out to its maximum.Note• Pull the extendable part out to its maximum. Fordetails on the procedure to extend the paper tray, referto “3.2 Loading Paper” (P. 47).2. Load the paper with the side to be printedfacing up. Curl up the back end of the paperso that it will not fall from the tray.3. Push the paper tray completely into the printer.Important• Do not close the lid of the paper tray. For tray 1 For trays 2 - 4* To load long-size paper with the longedge exceeding 356 mm (14"), loadthe paper with the edge protrudingfrom the tray.Short edge:76 to 216 mm (3" to 8.5")Long edge:127 to 900 mm(5" to 35.4")Short edge:98 to 216 mm (3.8" to 8.5")Long edge:148 to 356 mm(5.8" to 14")
