B6250 Network Guide> 17> > The EWS allows more detailed settings.2. Settings of the workstationSet the printer in the workstation.Refer to: “SETTING UP THE WORKSTATION” on page 17SETTING UP THE WORKSTATIONThis section explains the settings of Solaris 2.x workstation forprinting.BEFORE SETUPBefore setting up the workstation, check the following:• The setup procedures and commands may vary according todifferent versions of OS. Refer to the manuals that came withthe workstation for details.• To setup the printer, the user must be a superuser. Contactyour network administrator to perform the setup if you donot have the authority of a superuser.• Check the IP address set up for the printer in advance. Becautious as an incorrect IP address may cause severe errors.• Before performing any network setup (such as the IPaddress) to a host running under NIS (Network InformationService), consult the NIS administrator.EXAMPLES OF SETTINGS FOR SOLARIS 2.XThe examples below show printer settings for Solaris 2.6 where theprinter host name is printer1.1. 1. Registering a printer (printer name: P001) supporting thePostScript language#lpadmin -p P001 -s printer1\!PS2. 2. Registering a printer (printer name: P002) supporting thePostScript language that feeds paper from an A4-size papertray for duplex printing#lpadmin -p P002 -s printer1\!PS A4_DUP