B6250 Network Guide> 28> The EWS allows more detailed settings.2. Setting up the MacintoshInstall the printer driver (Adobe PS) for Macintosh. Install thescreen font if necessary. Connect the printre to the networkand select Add Printer via the printer setup utility or Printersand Faxes and the Plus button. Select Other using the PrintMenu and browse to select the B6250 ppd. Add optionsinstalled on the printer.SNMP SUPPORTThe printer can be managed via a standard SNMP managementstation. The printer supports SNMP-v1, SNMP-v2c, MIB-II, HostResources MIB, Printer MIB and OKI Data Private MIB.PRECAUTIONS AND LIMITATIONSON USING TCP/IPThis section explains the precautions and limitations of using thisprinter with TCP/IP.Setting Up the Printer• Be very careful in setting up IP addresses which arecontrolled as an entire system. Consult your networkadministrator before performing any setup on IP addresses.• Depending on the network environments, some requiresubnet mask and gateway to be set up. Consult your networkadministrator and set up the necessary items.Setting Up the Computer• Be very careful in setting up IP addresses which arecontrolled as an entire system. Consult your networkadministrator before performing any setup on IP addresses.• Before performing any network setup (such as the IPaddress) to a host running under NIS (Network InformationService), consult the NIS administrator.When setting a UNIX workstation, note the following also: