B710 B720 B730 User’s Guide > 103Error Messages (alphabetical order)Message Condition/Reason/ActionBad Action Format error.Bad Action Str Missing or bad action defined for job.Bad BUFSIZE Cmd Format error on BUFSIZE command.Bad COLUMN Cmd Format error on COLUMN command.Bad FEntry CMD Unrecognized Form Entry command.Bad FORMLINES Format error on FORMLINES command.Bad Header Cmd Unrecognized Header command.Bad LINE Cmd Format error on LINE command.Bad PAGE Cmd Format error on PAGE command.Bad PORT Cmd Format error on PORT command.Bad Target Str TARGET string format error.Bad TEntry CMD Unrecognized Target Entry command.Call Service Help message used for service-type errors.Cancel Job Confirmation prompt used when CANCEL ispressed.Canceling Job An operator-requested Cancel is in progress.Clock Not Set Real Time Clock has not been initialized.Close Duplexer Recovery message displayed when duplex dooris open.Close Rear Cover Recovery message displayed when rear cover isopen.Close Top Cover Recovery message displayed when top cover isopen.Code FLASH Error Defective Code Flash - user forced into FirmwareUpgrade.Command Format Bad command format.Completed Display for the files status.Cover Open Recovery action displayed when cover is open
