Oki C310dn Maintenance Manual

Also see for C330: User guide Hardware Manual User guide Safety information

Contents

Oki C310dn Maintenance Manual Manual pdf 105 page image

44346001TH Rev.1 105 /Oki Data CONFIDENTIAL 5. MAINTENANCE MENUS5.3.2.6 Color registration adjustment testThe color registration adjustment test is used for adjusting color registration or investigatingthe causes of color misregistration.Chapter 2 for an overview of color registration adjustment should be followed for recoveryfrom an error developed by the test.1. Enter the self-diagnostic mode (level 1) and, until the following messageappears, press or .REG ADJUST TEST2. Press the OK button, and the following message appears. Press or until atarget option appears.REG ADJUST TESTREG ADJ EXECUTE3. Press the OK button, and the displayed test option is performed.When REG ADJ EXECUTE is executed:A color registration adjustment test starts (the ONLINE lamp starts blinking).When the test ends, the upper display shows the result of the test (OK or anerror name), and the lower display shows ****RESULT.OKREG ADJ RESULTPressing displays the next test result. Pressing the displays thepreceding test result. Pressing restores the state for step 2.Remark: While the printer is initialized or issues an alarm or the cover is open, itdisplays the following message:NGREG ADJ RESULTPressing the CANCEL button during the test cancels the test (turning on theONLINE lamp), restoring the state for step 2.When REG ADJ RESULT is executed:Same button operations as used when REG ADJ EXECUTE is executed.When BLT REFLECT TEST is executed:A color registration adjustment belt reflection test starts (the ONLINE lampstarts blinking).When the test ends, the upper display shows the result of the test (OK or anerror name), the lower display shows ****RESULT.OKBLT REFLECT RSLTPressing displays the next test result. Pressing displays the precedingtest result. Pressing restores the state for step 2.Pressing the CANCEL button during the test cancels the test (turning on theONLINE lamp), restoring the state for step 2.When BLT REFLECT RSLT is executed:Same button operations as used when BLT REFLECT TEST is executed.Remark: While the printer is initialized or issues an alarm or the cover is open, itdisplays the following message.NGREG REFLECT RSLT4. Repeat steps 2 and 3 when necessary.5. Press to end the test (the state for step 1 is restored).Color registration adjustment test itemsDisplay DetailREG ADJ EXECUTE Executes color registration adjustment.REG ADJ RESULT Displays the result of color registration adjustment.BLT REFLECT TEST Judges whether color registration adjustment beltreflection is proper or notBLT REFLECT RSLT Displays the result of color registration adjustmentbelt reflection judgment.