Oki C310dn Maintenance Manual

Also see for C330: User guide Hardware Manual User guide Safety information

Contents

Oki C310dn Maintenance Manual Manual pdf 88 page image

44346001TH Rev.1 88 /Oki Data CONFIDENTIAL 5. MAINTENANCE MENUS5.1 System Maintenance menu (for maintenance personnel)By turning on each printer while holding down and , its System Maintenance menu isstarted. The menu is displayed only in English irrespective of the destination of the printer.Note: The menu allows for changes such as the printer’s destination changes, and istransparent to end-users of the printer.Table 5-1: Maintenance menu display tableCategory Item (1st Line) Value(2nd Line) DF FunctionSYSTEMMAINTEENTERPASSWORD****** ****** 000000Enters a password to enter the SystemMaintenance menu. The default for this item is000000. Six to 12 alphanumeric characters canbe entered for the item.OKIUSER OKIUSER ODAOELAPSJP1JPOEM1OEMAOEML*Sets a destination.JPOEM1: OEM in JapanOEMA: A4-default Overseas OEMOEML: Letter-default Overseas OEMThe printer automatically reboots after thismenu is exited.MAINTE-NANCEMENUDisplay condition:The security SD card function is disabled.SD CARDFORMAT(Only C530)EXECUTE - Initializes an SD card. When executed, thismenu is exited and starts initializing an SD card.Display condition:The printer has the SD card installed on it(ADMIN MENU-FILE SYS MAINTE-SD CARDis set to ENABLE).FLASHFORMATEXECUTE - Displays the following confirmation message inresponse to the press of the OK button:ARE YOU SURE?YES/NONO restores the previous menu display whenselected. When selected, YES exits this menu,starting formatting the installed resident (on-board) flash device.* Never use this item.MENU RESET EXECUTE - Resets the information in the EEPROM tofactory default settings. The printer automaticallyreboots after change to the default settings.* This does not initialize some special items.Category Item (1st Line) Value(2nd Line) DF FunctionCONFIGMENUCODESET TYPE1TYPE2 *Displayed for all the destinations of the printer.TYPE1: Disables Russian, Grease andBulgarian (language file downloading). Thisvalue uses English for the operator panellanguage when the printer already has any ofthe three languages downloaded.TYPE2: Enables Russian, Grease andBulgarian.The printer automatically reboots after thismenu is exited. The default for this item isTYPE2 when the printer's destination is OEL/APS/OEMA, and TYPE1 when it is not OEL/APS/OEMA.TESTPRINTMENUTEST PRINTMENUENABLEDISABLE *Sets whether or not to display PRT CHK PATNand ENG STATUS PRINT in the USER MENU-PRINT INFORMATION category. This itemalways does not display PRT ID CHK PATN orENG STATUS PRINT when set to DISABLE.When this menu is exited after change of thesetting for the item, the printer restarts.FUSEKEEPMODEFUSE KEEPMODEEXECUTE - Places the printer online after a command isissued from the CU to PU by pressing the OKbutton. With the printer turned on, consumablesof the printer can be replaced with new ones,and then the printer can be checked for properoperation (where, not breaking the new ones’fuses, the printer adds no operation countsto the life of the consumables replaced withthe new ones). Turning off the printer ends thecheck mode. Turning it on next time disables themode.PERSON-ALITY(OnlyC530dn)IBM 5577 ENABLEDISABLE *Does not allow USER MENU-SYS CONFIGMENU-PERSONALITY to display PDLlanguages for which DISABLE is set withthis menu. When receiving print data in suchlanguages, the printer displays INVALIDDATA, discarding the data. When the printer'sdestination is Japan and IBM PPR III XL andEPSON FX is set to ENABLE, no operation ofthe printer is assured.IBM PPR III XL ENABLEDISABLE*EPSON FX ENABLEDISABLE*