Oki C3530nMFP Network User's Manual

Also see for C3400: User guide Network guide

Contents

Oki C3530nMFP Network User's Manual Manual pdf 23 page image

Network User’s Guide for C3400n and C3530 MFPWindows - 23WINDOWS XPNOTE:Windows XP requires administrator privileges.With Windows XP, there are four options for printing using TCP/IP:> Oki LPR> Standard TCP/IP Port using:• LPR• Port 9100Oki LPRTo install the Oki LPR port, see “Oki LPR” on page 20.Standard TCP/IP Port using LPR or Port 9100To install this port, proceed as follows:1. Select Start -> Control Panel -> Printers and Faxes - Add a Printer.2. Click Next.3. Select “Local printer attached to this computer” and ensure that the“Automatically detect and install my Plug and Play printer” check boxis not selected. Click Next.4. Select “Create a New Port” and change “Type of Port:” to “StandardTCP/IP Port”.5. Click Next. The “Add Standard TCP/IP Printer Port Wizard” isdisplayed.6. Click Next and enter the host name or IP address for the printer, forexample, ‘192.168.1.31’. If the above IP address is entered, the PortName will default to IP_192.168.1.31.7. Click Next. “Additional Port Information Required” is displayed.8. Under “Device Type”, select Custom and click Settings.9. Depending on whether you are installing the Windows Standard TCP/IP Port using LPR or Port 9100, enter the following details:LPR> Set “Protocol” to LPR.> Under “LPR Settings”, enter Queue Name: ‘lp’ and ensure that “SNMPStatus Enabled” is not selected.Port 9100