Oki C3530nMFP Network User's Manual

Also see for C3400: User guide Network guide

Contents

Oki C3530nMFP Network User's Manual Manual pdf 7 page image

Network User’s Guide for C3400n and C3530 MFPNetwork Configuration - 7SPECIFICATIONSELF-DIAGNOSTIC TESTWith the printer power switched on, press the TEST button located on theNetwork Interface Panel (at the rear of the printer) for more than threeseconds and then release. The self-diagnostic test results and configurationsettings are printed.On the first page of the Network Information that is printed out, under theheading “General Information” the MAC or Ethernet Address is given. Forexample:MAC Address 00:80:87:D4:FA:00DEFAULT USER NAME AND PASSWORDTo apply configuration changes using a Web browser, you will be promptedfor a username and password. The username is ‘root’ and the defaultpassword is the last six characters of the Ethernet (MAC) address, e.g.‘D4FA00’ (any alpha characters must be in upper case).You can change the root password to allow you to change settings andconfigure the printer through the Web browser. You can find instructions onhow to change the password for the Network Card Setup sections for Windowsor Mac.ITEM SPECIFICATIONFrame Types IEEE 802.2IEEE 802.3Ethernet-II, SNAP, AUTONetwork Interface 100BASE-TX10BASE-TNetwork Protocols TCP/IPNetwork layer ARP,Session layer TCP, UDPApplication layer LPR, HTTP, BOOTP, DHCP,SNMP, DNS.Functions Self-diagnostic test printingMonitoring and configuration by Web browser