3(continued on next page)Windows TCP/IP Network Installation: C5150n & C5200neSoftwareSet Up the NetworkPrint the Menu MapThis will provide information on the printer’s IP Addresswhich is needed to set the printer up on the network.□ With the printer turned on, press +.□ Press ENTER.□ Press ENTER.The MenuMap prints.□ Look for the IP Address under TCP/IP Configuration.Run The Admin Mgr / Quick SetupUtilityUse this utility to allow various computers on the networkaccess to the printer.□ Insert the Drivers CD supplied with your printer in theCD-ROM drive. The CD will autorun. (If it doesn’t,click Start → Run → Browse. Browse to yourCD-ROM drive, double-click Install.exe, click OK.)□ The License Agreement appears, click Next.□ Select your language.□ The Menu Installer Software Installation dialog boxappears. Click the Productivity Software button.□ Click the Admin Mgr / Quick Setup button.□ The OkiLAN 8100e Softnic Setup Utility dialog boxappears. Select your language.□ Select from the following buttons:• Please read before using: Readme file containinginformation and instructions for this utility.• OkiLAN 8100e Softnic Standard Setup: if youare experienced in network setup and want accessto all the setting options, click this button andfollow the on-screen instructions for completingthe installation.• OkiLAN 8100e Softnic Quick Setup: This setupis for less experienced users and does not provideas many setting options as the Standard Setup. Touse Quick Setup, click this button and follow thesteps below.□ The Welcome dialog box appears. Click Next.□ If the Ethernet Address information does notautomatically appear, click Search.□ Click the Ethernet information displayed, then clickNext.□ Select Yes for TCP/IP protocol and click Next.□ Select Obtain an IP Address automatically, then clickNext.□ Select No for NetBEUI protocol, then click Next.□ Click Execute.□ Click Finish.□ Click the Exit button, then click Yes to confirm that youare exiting the setup utility.□ Click the Back button.Install the Driver□ With the Driver CD in your CD-ROM driver and theMenu Installer Software Installation dialog boxdisplayed, click the Printer Driver Installer button.□ The Local or network printer dialog box appears.Select Network printer, then click Next.□ The Connection type dialog box appears. SelectDirectly to the network using TCP/IP and click Next.□ The TCP/IP Connection dialog box appears.□ Follow the on-screen instructions to complete theinstallation.