Menu functions> 82PARALLEL MENUThis menu controls the operation of the printer’s Centronicscompatible (IEEE-1284) data interface.USB MENUThis menu controls the operation of the printer’s USB datainterface.PARALLEL MENUITEM SETTINGS EXPLANATIONPARALLEL ENABLE /DISABLEEnables or disables operation of thisport.BI-DIRECTION ENABLE /DISABLEEnables or disables bidirectionalfunctionality of this port.ECP ENABLE /DISABLEEnables or disables ECP mode.ACK WIDTH NARROWMEDIUMWIDESets width of ACK signal incompatible receiving to 0.5μS,1.0μS or 3.0μS.ACK/BUSYTIMINGACK IN BUSYACK WHILEBUSYSets the order in which the BUSYsignal is output. For ACK IN BUSY,BUSY goes low at end of ACK pulse.For ACK WHILE BUSY, BUSY goeslow at centre of ACK pulse.I-PRIME 3 MICRO SEC50 MICRO SECDISABLESets time to enable/disable the I-PRIME signal. Can be enabled with3μS or 50μS nInit signal, or disabledcompletely.USB MENUITEM SETTINGS EXPLANATIONUSB ENABLE /DISABLEEnables or disables operation of thisport.VERSION 2.0 Selects USB version forcompatibility.SOFT RESET ENABLE /DISABLEEnables or disables the SOFT RESETcommand.
