Menu functions> 83NETWORK MENUThis menu controls the operation of the printer’s 10Base-T/100Base-TX network interface.NETWORK MENUITEM SETTINGS EXPLANATIONTCP/IP ENABLE /DISABLEEnables or disables this networkprotocol.NETBEUI ENABLE /DISABLEEnables or disables this networkprotocol.NETWARE ENABLE /DISABLEEnables or disables this networkprotocol.ETHERTALK ENABLE /DISABLEEnables or disables this networkprotocol.FRAME TYPE AUTO / 802.2 /802.3 /ETHERNET II /SNAPSelects the Ethernet MAC layerframe type.IP ADDRESSSETAUTO / MANUAL Specifies whether IP addressallocation is automatic (DHCP) ormanually assigned.IP ADDRESS xxx.xxx.xxx.xxx Current assigned IP address. Tochange, press ENTER and use +/–keys to increment 1st octet, thenpress ENTER again to move on tonext octet. When 4th octet has beenset, press ENTER again to registernew address.SUBNET MASK xxx.xxx.xxx.xxx Current assigned subnet mask. Tochange, proceed as above.GATEWAYADDRESSxxx.xxx.xxx.xxx Current assigned gateway address.To change, proceed as above.INITIALIZENIC?EXECUTE Initialises the network hardware.WEB/IPP ENABLE /DISABLEEnables or disables Web config.facility and Internet PrintingProtocol.TELNET ENABLE /DISABLEEnables or disables Telnet config.facility.FTP ENABLE /DISABLEEnables or disables communicationvia FTP.SNMP ENABLE /DISABLEEnables or disables SNMP protocol.
