Operation> 58SCANNER OPERATION1. Start your scanning application.2. Select the File menu and choose Select Source.If the Select Source command is not available on the Filemenu, see your application's user's guide to determinehow the TWAIN link is used. A dialogue box with a list ofscanning sources appears.3. Select C55x0.You need to select the source only once, unless you wantto choose another scanner.4. Place the document face DOWN on the document glass orface UP in the ADF.5. Select the File menu and choose Acquire.A dialogue box containing scanning features appears.6. Select the scanning method you want to use from theScan Method (1) drop-down menu.7. Select the mode you want to use for your scans from theImage Type (2) drop-down menu.8. Select a scanning resolution from the Resolution (3)drop-down menu.9. Select the setting for the scanning features (e.g. Sharpen,Descreen, etc.) that you want to use (see “enhancing yourimage” later in this Chapter).321
