C6100 Series Userís Guide154USB Problems _____________________Cannot configure for USB connectionNOTEWindows NT 4.0 does not support USB. Windows98 upgraded from Windows 95 may not supportUSB.Possible cause RemedyUSB cable does not meetspecifications.Use USB cable to specification Ver.2.0.Interface is disabled. Check that USB interface is set to Enable inthe menu (USB MENU → USB → ENABLE).Configuration procedurewas not correctlyfollowed or cancelled.Configure again from the beginning.USB cable isdisconnected or faulty.Reconnect or try another cable.A USB hub is being used. The printer cannot be used with a USB hub.Connect the printer and computer directly.The USB cable isinstalled in the Ethernetport.Make sure the USB cable is plugged into theblack USB port (1) on the printer:c52_usb_2_crop.jpg
