44205401TH Rev.1 76 /Oki Data CONFIDENTIAL 4. Component replacement4.2.18 Cover Assy front/ Board-RSF/MPT hoppingroller/ Frame Assy separator/ Feeder Assy regist(1) Open the top cover.(2) Remove the plate shield and remove the connector. (See section 4.2.8)(3) Disengage the claws of stay L .(4) Remove the motor cover. (See section 4.2.14)(5) Remove the four screws (silver, No:42920406) and remove the feeder unit .(6) Disengage the claw, and remove the cover sensor .(7) Remove the connector and remove the Board-RSF .(8) Remove the MPT Assy. (See section 4.2.17)(9) Rotate until the claw of lever is disengaged, and remove it.(10) Remove the two screws (black, No:42932708), and remove the guide Assytop .(11) Remove the two lock shafts and two springs .(12) Remove the hopping roller shaft .(13) Remove the supporters (2 places), and remove the frame Assy separator andspring .
