Network configuration > 26U SING A WEB BROWSERIf the printer is connected to the network using TCP/IP, its settings and the printer menusettings can be configured using a Web browser. Refer to the relevant manuals for detailsof how to launch and use the browser.MICROSOFT INTERNET EXPLORER1. Select Internet Options in the Tools menu.2. Click on the General tab and click Settings in Temporary Internet files.3. Select Every visit to the page in Check for newer versions of stored pages.DEFAULT USER NAME AND PASSWORDTo apply configuration changes using a Web browser, you will be prompted for a usernameand password. The username is admin and the default password is aaaaaa.The admin password can be changed to allow you to configure the printer by using a Webbrowser/TELNET/AdminManager. To change the password, select PasswordConfiguration in the Maintenance tab and follow the on-screen instructions.ADJUSTING PRINTER SETTINGSThe network addresses used in this manual are shown as examples only. Networkaddresses used in your installation must be generated from your own network.1. Configure the IP Address, Subnet Mask and Gateway for the network card. Launchthe Web browser, enter the IP Address of the network interface card in Address(Location/Position) and press the Enter key.2. Select a tab and items to be changed in the left frame. You need to log in as adminto be able to configure all items. Non-admin users cannot configure all items.