Oki C711WT Network Manual

Also see for C711WT: How to remove Jammed Paper Material safety data sheet Repack Procedure Quick start guide User guide

Network configuration > 95. Select Install Network Card Setup Utility link.6. Select your language.7. Select Oki Device Quick Setup and follow the on-screen instructions.8. When the settings are correct, click Execute. The new settings are transmitted tothe network card but it still operates with pre-transmission settings.9. Click Finish to validate the new settings.10. Switch the printer off for 15 seconds and on again.U SING A DMIN MANAGERAdminManager is a powerful Microsoft Windows-based utility to configure all networkinterface functions easily and intuitively via a graphical user interface.Configuration requires a PC with a supported Windows operating system (see page 8),running TCP/IP or IPX/SPX (NetWare).This utility can only be used on a PC that can be connected to the network with TCP/IP orIPX/SPX and must be used on a PC that is located on the same segment as the printer.INSTALLATION1. Insert the CD-ROM into the CD-ROM drive. The Setup Utility starts automatically. Ifit does not start, double-click \setup.exe (in the root directory) on theCD-ROM.2. Select the appropriate language.3. Navigate to and select Network Software.4. Select Install Network Card Setup Utility link.5. Select your language.NOTENot all utilities, features or protocols are supported by every operatingsystem. Please check with your support website for latest information.