Oki Data CONFIDENTIAL44043511TH Rev.2 117 /4.3.8 Job-Offset-Assy 723 and Basket-Assy(1) Open the Cover Assy-Top.(2) Unscrew screw , remove Frame-Duct , then remove the connector (remove theconnector through the shaft)(3) Remove the 2 hinges, then remove the Job-Offset-Assy , and disconnect the con-nector.(4) Unscrew 2 screws , then remove the 2 hinges, and remove the Cover Assy-Top (Sub).(5) Remove the six screws of the Guide-Link-R and the three screws of the Guide-Link-L. Remove the Plate-Top and the Basket Assy with their interlock.(6) Remove the 2 hinges, then remove the Cover Assy-Top (Sub) .(7) Remove the Side Cover (L) Rear .(8) Remove the E-ring , unscrew 2 screws , then remove the Plate-Support (Top) ,Collar , Shaft-Top (A) , Spring-Torsion-Top (L) , Spring-Torsion-Top (B) .(9) Unscrew 3 screws , then remove the Gear-Assy-L .(10) Unscrew 3 screws , then remove Gear-Assy-R .(11) Remove the Waste toner Assy tube , then remove Basket-Assy .
