Oki Data CONFIDENTIAL44043511TH Rev.2 245 /Display on the operator panel Meaning MeasuresData Present There is data remaining unprinted. Check the data.Check Data An error has occurred duringreception of program data.Check the data.Check DataProgram Data Write ErrorAn error has occurred during writingof program data.Check the data.Check DataProgram Data Receive Error"An error has occurred duringreception of program data.Check the data.Cancelling Job Data is being deleted. Wait for a while.Data Arrive Data is being received. Wait for a while.Print Demo Page The demo page is being printed. Wait for a while.Power Off and Wait for a while126:Condensing ErrorCondensation has occurred in theprinter. It is necessary to turn off thepower and leave it standing for awhile.Turn off the power and leave itstanding for a while.Toner Not InstalledCCCCA CCCC toner cartridge is notinstalled, or an unrecognized CCCCtoner cartridge is installed.Install a genuine CCCC tonercartridge.Non Genuine TonerCCCCAn unrecognized CCCC tonercartridge is installed.Install a genuine CCCC tonercartridge.Check Toner CartridgeImproper Lock Lever PositionCCCCThe toner cartridge is not locked. Check the lever of the toner cartridgefor its position.Install TonerCCCCThe indicated toner has run out, orgenuine toner of indicated color isnot used.Install a genuine toner cartridge ofthe indicated color.Reset Drum Basket An error has occurred during transferof waste toner.Open the top cover and reinstall thedrum basket.Reset Drum BasketWaste Toner Transfer ErrorAn error has occurred during transferof waste toner.Open the top cover and reinstall thedrum basket.TRAY n Overfilled Too much paper is loaded into thetray n.Remove some paper from the tray n.Change Paper in TRAY nMEDIA_SIZEMEDIA_TYPEPlease see HELP for detailsPaper loaded into the indicated trayis different from the specified one.Load paper of the indicated size andtype in the indicated tray and pressthe ONLINE button.TRAY n Lift Up Error Paper can not be fed from the tray n. Load paper into the tray n correctly.Printing(TRAY n) The printer is printing on paper fromthe tray n.–TRAY n Empty The tray n has run out of paper. Load paper into the tray n.TRAY n Overfilled Too much paper is loaded into thetray n.Remove some paper from the tray n.TRAY n Near End The tray n is running out of paper. Prepare paper to load into the tray n.Reset TrayTRAYPaper was not fed from the indicatedtray, and it is necessary to reinstallthe tray.Reinstall the tray.Install TrayTRAYThe indicated tray is not installedcorrectly. It must be reinstalled.Reinstall the indicated tray.Network Error A network error has occurred. Restart the printer.Print Network Config The network configuration is beingprinted.Wait for a while.
