13 - EnglishAvailable InterfacesNoteCables are not supplied with your printer.Your printer has three interfaces:1 Ethernet- For network cable connection of PCs and/orMacs- 10Base-T and 100Base-TX2 USB- For direct connection to a PC or Mac.- Requires a cable conforming to USB version2.0 or above.3 Parallel (Windows only)- For direct connection to a PC.- Requires a bi-directional parallel cable(compatible with IEEE-1284)Installation ProceduresWindowsNetwork Installation, see below.USB Installation, see page 15.Parallel Port Installation, see page 15.MacintoshNetwork installation, see page 16.USB Installation, see page 17.Windows NetworkInstallationMake the Network ConnectionImportant!In order to reduce electromagneticinterference—”noise” that interferes withTVs or other appliances—you must installthe included ferrite core on the networkcable.NoteThe Ethernet cable and hub are not included withyour printer.1 Turn off the printer.2 Turn off the computer.3 Loop the cable as shown and place the ferritecore supplied with the printer about 1 inch(25 mm) from the connector on the printerend.
