Oki C910 Setup Manual

Also see for C910: Hardware Material safety data sheet User guide Troubleshooting guide Service training

Contents

14 - English4 Connect the ferrite core end of the Ethernetcable to the printer.5 Connect the other end of the Ethernet cableto a suitable hub.Print the Network InformationPageThe Network Information page provides theinformation you need to install software and toset up the network.1 Make sure the printer is turned on.2 Press Menu on the control panel.3 Press the down arrow to select PrintInformation. Press Enter.4 Press the down arrow to select Network. PressEnter.5 Execute appears on the display. Press Enter.Install the Driver(s) and Utilities1 Make sure the printer is off.2 Insert the CD supplied with the printer in theCD-ROM drive. The CD will autorun. (If itdoesn’t, go to the CD’s main directory anddouble click [setup.exe].)3 Select your language.4 Accept the license agreement.5 Click [Driver Setup].6 Click [Install Driver].7 Select network printer. Click [Next].8 When prompted, select the printeremulation(s) you wish to install (PS, PCL).9 Follow the on-screen instructions.Install the User’s GuideIf you wish to install the User’s Guide pdf on PCsconnected to the printer:1 Insert the CD supplied with the printer in thePC’s CD-ROM drive, and wait for it toAutoRun. (If it doesn’t, go to the CD’s maindirectory and double click [setup.exe].)2 Select your language and accept the licenseagreement.3 Click [User Guides].4 Click [Install User Guide] and follow the on-screen instructions.