Adding Printers Using LPD (TCP/IP) ProtocolsAppendixSetting Up2 Printing3Before use1 Basic Device Operations4 Index- 123 -zz Adding Printers Using LPD (TCP/IP) ProtocolsWith Mac OS X environments, you can connect printers using LPD protocols (TCP/IP).Apple Talk cannot be used with Mac OS X 10.6 or later, so for network connections, connect the printerusing Bonjour (Rendezvous) protocols or LPD protocols (TCP/IP).Preparations1 Check that the IP address, subnetmask, and router address, etc., havebeen set correctly for the desired MacOS, and that you are connected to thenetwork using LPD protocols (TCP/IP).2 Download the PPD installer for MacOS X for the printer to be connectedfrom the OKI Data homepage (http://www.okidata.co.jp/), unzip and startthe PPF installer, and then install PPDon the relevant Mac OS. This step isunnecessary if PPD is already installed.3 Set the IP address, subnet mask, andgateway address, etc., on the printer tobe connected. Make sure the printer isturned ON, and connected to the TCP/IP network environment.Procedure for AddingPrinters1 Open the Mac OS system environmentsettings, and click the "Print & Scan"icon to open the "Print & Scan" screen.2 Click the [+] button to open the "Addprinter" screen.
