PaperAppendixSetting Up2Before Use1 Printing3 Basic Device Operations4 Index- 91 -Type Size ThicknessSettable tray Output binMulti-purposetray Tray 1Trays2 to 5(Optional)Face-up Face-downPostcard*2 Hagaki, OufukuHagaki4-Ren Hagaki*1-O O O O OEnvelope *2 Nagagata #3,Nagagata #4,Nagagata #40,Yougata #0, Yougata#2 (C6), Yougata#4, Kakugata #2,Kakugata #3,Kakugata #6*1,Kakugata #8, Younaga#3 *1Using GSM weight85g/m2 paperO X X O XCom-9, Com-10,Monarch, DL, C5, C4Uses 24Lb paper O X X O XLabels *2 A4, Letter - O O X O XGlossy *2 A4, A3, A3Nobi GSM 128g/m2 (reampaper 110kg) O O O O OTransparency*2 A4, Letter - O O X O XIndex cards 76.2mm×127mm(3"×5") O X X O X*1: Use the printer control panel to set the paper size of the tray used to [Custom], and set [Paper width] and [paper length] tothe values shown in the table below. Use the printer drivers to select the values from the table below.Paper Size Device Setup Setting the printerdriver [Paper size]Paper width (mm) Paper length (mm)13"×18" 330 475 13 × 18in4-Ren Hagaki 200 296 4-Ren HagakiKakugata #6 162 229 Kakugata #6Younaga #3 120 235 Younaga #3*2: Print speed is slower for postcards, envelopes, labels, glossy paper, and transparencies.Notez If setting paper in the tray horizontally ( ), print speed will be slower than if set vertically ( ).z Printing will be slower if the paper size set is A6 or A5 size, or has a smaller width than 148mm (A5 width).
