41956001TH Rev.6 78 /Oki Data CONFIDENTIAL3.1.2.5 Test printThis self-diagnostic routine is used to print the test patterns in the PU. The other test patterns arestored in the controller.1. Press the 11111 and 55555 keys until the self-diagnostic (Level 1) mode is entered and [TEST PRINT]is displayed in the top line. (Key 11111 increments the test item and Key 55555 decrements the test item.)2. The bottom line displays the setup items applied only for test print. Press the 22222 and 66666 keys untilthe corresponding item is displayed. (Key 22222 increments the item and Key 66666 decrements theitem.)3. When the 33333 and 77777 keys are pressed, the setup items appear in the top line and set values appearin the bottom line. The set value increments by pressing the 33333 key and decrements by pressingthe 77777 key. (The value that is set at the end will be applied.) Repeat Stop 3 as required.DisplayPRINT EXECUTETEST PATTERNCASSETPAGECOLORDUPLEXFunctionPress Key 3 to start print. / Press Key 7 to end print.(In page unit.)0: empty page1-7: Refer to the following page (pattern print).8-15: empty pageSet paper feed source.Set number of pages to test print.Select color or monochrome.Perform duplex print with 2-page stack.Set duplex print to OFF.Perform duplex print with 1-page stack.Set Value—0TRAY1TRAY2TRAY3FF0000ONOFF2 PAGES STACKOFF1PAGES STACK• is the default. The set items are valid only in this test mode. (They will not be written inEEPROM.)Note: Page setting: Key 11111 or 55555 shifts the digits.Color setting: The following indications appear in the panel when Key 11111 or 55555 is pressedwhen set to [ON].Print setting for each color:Shifts by pressing Key 11111 or 55555.Switch between [ON] and [OFF] is set by pressing Key 33333 or 77777.Panel indication returns by pressing Key 22222 or 66666.TEST PATTERN1
