9333. SETTING FAX FUNCTIONSYou can change the initial setting (default setting) of fax and Internet Fax features.1 Press the [USER FUNCTIONS] button on the control panel to enter theUser Functions menu.2 Press the [USER] button, and then press the [FAX] button on thetouch panel.• The FAX screen is displayed.3 Specify the following items as you require.• In the “RESOLUTION” option, press the desired mode button.• In the “ORIGINAL MODE” option, press the desired mode button.• In the “EXPOSURE” option, press light or dark buttons to specify the default exposure manually, or press the[AUTO] button to select auto mode for the default exposure mode.• In the “TX TYPE” option, press the desired mode button.[MEMORY TX] — Press this to set the Memory TX mode as default transmission mode that will send afterscanning and saving all originals in the memory. This mode enables multi-address transmission.[DIRECT TX] — Press this to set the Direct TX mode as default transmission mode that will send originalspage by page after every original has been scanned. This mode disables multi-address transmission.The “TX TYPE” option is available only when the optional Fax unit is installed.4 Press the [Next] button to display the next screen.
