9534. SETTING SCAN FUNCTIONSYou can change the initial setting (default setting) of scan job.1 Press the [USER FUNCTIONS] button on the control panel to enter theUser Functions menu.2 Press the [USER] button, and then press the [SCAN] button on thetouch panel.• The SCAN screen is displayed.3 Specify the following items as you require.• In the “COLOR MODE” option, press the desired mode button.• In the “JPEG COMPRESS” option, press the desired mode button.• In the “THRESHOLD” option, press the light button or dark button to specify the contrast. If you move to theleft, the black and white in an original will be scanned neutrally. If you move to the right, the black and white inan original will be scanned distinctly.When the Color mode is set to the Auto Color mode and the equipment detects the originals as black originals,the equipment uses the setting of the “THRESHOLD” option. This setting specifies the contrast for scanning ablack original in the Auto Color mode.• In the “SINGLE/2-SIDE SCAN” option, press the desired mode button.[SINGLE] — Press this to set single page scan as default scan mode.[BOOK] — Press this to set book scan mode as default scan mode. This enables to scan both side of originalsin the same direction.[TABLET] — Press this to set tablet scan mode as default scan mode. This enables to scan front page in thegeneral direction, and scan back page rotated 180 degree.• In the “ROTATION” option, press the desired mode button.4 Press the [Next] button to display the next screen.
